How do I clean Up DAP® 3.0™ High Performance Sealant?
Excess uncured DAP® 3.0™ High Performance Sealants can be cleaned up from surfaces or tools using mineral spirits. Once they have cured, any excess sealant needs to be cut or scraped away.
Is DAP® 3.0™ Kitchen & Bath Sealant safe for granite and marble?
Yes, DAP® 3.0™ Kitchen & Bath Sealant is safe for granite, marble and other natural stone surfaces and won’t cause staining.
What paints are compatible with DAP® 3.0™ High Performance Sealant?
Acrylic latex-based paints are compatible. Priming with an acrylic latex primer is necessary before painting with oil-based paints.
If I only use half of a cartridge, can I use the other half at a later date? If so, what are the proper storage conditions?
Yes. You can use the remaining product after the cartridge is opened if stored properly. The cartridge should be stored below 80°F in a dry place. When ready to use again, remove the cured material at the tip or cut the tip back to reveal fresh product.
How long is the shelf life on this product?
A minimum of 12 months from the date of production in an unopened tube
Is this sealant food grade?
No. The product carries no food certifications
Can I use this product to set a drain?
No. The product is not recommended for under water applications
The sealant is water resistant in just 30 minutes; does that mean it is cured, too?
No. The product develops a water resistance quickly, but achieves a full cure over the next few days.