Why won’t foam come out of the can?
Follow instructions carefully to be sure you have attached the adapter securely and that you are holding the can in the right direction (upside down or right side up). Shake the can well. In some cases, if the can has been stored improperly, pressurized air may have leaked from the valve leaving the can without propellant. In that case, return the can to the store where it was purchased and exchange for another.
How does foam sealant compare to other types of insulation?
Unlike caulking materials and other sealants that are solid, heavy and non-insulating, foam sealants expand to form an outer skin that contains closed air cells that provide an effective barrier against energy loss. Touch ‘n Foam Professional forms a permanent seal that will not shrink or pull away from the material it has bonded to, making foam the best sealant available against air and moisture infiltration.
Do surfaces require any special preparation before applying DAP Foam?
Application surface must be clean, dry and free of all foreign material.
Will Touch 'n Foam prevent insects or rodents from penetrating into the home?
Touch 'n Foam insulating sealants do not contain any nutritive value and provide an effective barrier against insect and pest intrusion; however, some persistent pests may chew through cured foam. Touch 'n Foam recently launched Mouse Shield Foam Sealant + Blocker as a specialty foam containing an EPA-registered pesticide that protects the foam from attack by mice, birds, bats and tree squirrels. It also blocks ants, roaches, spiders and bees.
Is Touch 'n Foam waterproof?
Touch 'n Foam insulating sealants are water-resistant and form an airtight seal when applied properly.
Is Touch 'n Foam fire retardant?
Yes. Touch 'n Foam sealants meet the criteria of flame / smoke spread to be classified as a Class A foam. While these sealants are fire retardant (self-extinguishing when flame is removed), they are not intended to be used a fire barrier or fire stop.
Can Touch 'n Foam be used to insulate a wall?
No. Touch 'n Foam insulating sealants are formulated to fill cracks, gaps and small voids and require ventilation and humidity to cure. Larger voids may not allow enough air penetration for proper curing and may require special techniques to insulate properly. Touch 'n Foam products should not be used around tub surrounds.
How can I remove foam from clothing, carpet or other surfaces?
If the foam has not cured (it is still moist), it may be removed by wiping with a clean, dry cloth or by using acetone (or nail polish remover containing acetone). Do not use soap and water as moisture helps to cure foam. No solvent will remove cured (dry) foam. If the foam has already cured (it’s firm and dry), it cannot be removed from clothing, upholstery or carpets. Cured foam may be trimmed, scraped or sanded from rigid surfaces; however, this may result in a need to repaint or re-stain the surface.
How do I store Touch 'n Foam?
Store can upright below 90°F. It’s important to keep the can upright to ensure air doesn’t leak from the valve until ready to use. Never store Touch ‘n Foam in your vehicle.
Can Touch 'n Foam be used outdoors?
We recommend Touch ‘n Foam Landscape foam for exterior applications. Landscape will not discolor or break down in sunlight like other foams. It is plant and fish safe, and the dark color blends into shadows well. Touch 'n Foam MaxFilland Home Seal formulas may also be used indoors or outdoors. These foams should be painted when used outside in order to prevent discoloration and break down from UV exposure. Foam can be painted in about one hour after dispensing. Touch 'n Foam No Warp, Fire Break and Easy Fill should be used indoors only.
In what temperatures should I use Touch 'n Foam?
For best results, the can should be at room temperature with an ambient temperature between 60°-100°F (16°-38°C). Home Sealhas the ability to cure in both higher and lower temperatures. Polyurethane foam sealants require some humidity to be present in order to cure properly.
Can I reuse DAP Foam?
DAP Foam is reusable for up to three weeks after initial use. To store unused portion, bend straw back and attach to the knob atop the dispensing trigger. Store can upright below 90°F. Reuse product within three weeks. To re-use, cut the end off the straw (removing any cured foam), shake well and apply as directed.
Will Touch 'n Foam harm the ozone layer?
Touch 'n Foam insulating sealants are manufactured to be upper-ozone safe and environmentally friendly. Use black Landscapefoam for exterior uses such as koi ponds when you need a plant and fish safe foam.